All Products>Abrasives>Scotch-Brite™ HS Premium Blend and Finish Disc, A/O Medium, 24 in x 1-1/4 in

Scotch-Brite™ HS Premium Blend and Finish Disc, A/O Medium, 24 in x 1-1/4 in

Product ID: 7100209484
$64.32 ($64.32 ea.)

QTY:

Product Description

Conformable, Durable Blending and Burr Removal
Constructed with premium-grade aluminum oxide, this high-strength open web disc combines conformability with superior durability and cut – so you get the job done faster and are left with a great finish. If you are using wire wheels or scrapers, but dislike their inability to get into tight spots, replace them with a Scotch-Brite™ HS Premium Blend and Finish Disc. Scotch-Brite™ conformability allows you to access hard-to-reach areas. This long-lasting, highly efficient disc is also load-resistant to stand up to prolonged use and can significantly lower your abrasive costs while increasing productivity.

The Standard Abrasives™ Blend and Finish Disc won't sacrifice part geometry and can be used with a disc sander or die grinder to eliminate the effort of manual scraping. When the work surface requires broader coverage to reach intricate areas with the outer diameter of the disc, multiple discs can be stacked on a straight shaft tool or bench motor.

Fast Cut and Long Life
Aluminum oxide is a popular choice among industrial professionals due to its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Its high cut-rate, hardness, strength, and low heat retention all combine to make aluminum oxide mineral a good choice in grinding applications. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

The Scotch-Brite™ Advantage
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

Product Features

Abrasive MaterialAluminum Oxide
ApplicationDeburring, Finishing, Grinding, Surface Preparation
Center Hole Diameter1.25 in
GritNon Pertinent
Overall Diameter24.0 in

Product Highlights

  • Great flexibility and conformability for weld burn removal, deburring, blending, finishing and rust removal while leaving a consistent finish
  • Higher grade aluminum oxide mineral adds efficiency to removal of weld burns, small burrs, and rust
  • Springy fibers conform to irregular surfaces with uniform results
  • Load resistant open web construction provides extended use
  • Superior durability and cut make the disc long-lasting
  • Discs can be used individually or stacked on a straight shaft tool or bench motor for a broader cleaning surface

Need Sales Help?

Contact Us

Similar Items

3M™ Microfinishing Film Roll 372L, 30 Mic 5MIL, 4 in x 150 ft x 3 in (101.6mmx45…

Product ID: 7000000248
($230.44 ea.)

3M™ Microfinishing Film Roll 362L, 60 Mic 3MIL, 4 in x 150 ft x 3 in (101.6mmx45…

Product ID: 7000000333
($207.19 ea.)

3M™ Roloc™ Disc 777F, TR, 3 in x NH, P120 YF-weight, 50/Carton, 200 ea/Case

Product ID: 7000000557
($1.41 ea.)

3M™ Flexible Diamond Hand Lap 6200J, 2-1/4 in x 3-3/4 in M40 Micron, 10 ea/Case

Product ID: 7000000576
($21.48 ea.)

Scotch-Brite™ EXL Unitized Wheel, XL-UW, 2S Fine, 1 in x 1 in x 3/16 in, 50 ea/C…

Product ID: 7000000690
($4.87 ea.)

Scotch-Brite™ EXL Unitized Wheel, XL-UW, 2S Fine, 2 in x 1/4 in x 1/4 in, 60 ea/…

Product ID: 7000000696
($5.14 ea.)

Scotch-Brite™ EXL Unitized Wheel, XL-UW, 6A Medium, 3 in x 1/4 in x 3/8 in, 40 e…

Product ID: 7000000703
($10.09 ea.)

Scotch-Brite™ Hand Pad 7447, HP-HP, A/O Very Fine, Maroon, 6 in x 9 in, 20/Carto…

Product ID: 7000000728
($88.23 ea.)

Scotch-Brite™ EXL Deburring Convolute Wheel, XL-WL, 8S Fine, 6 in x 1 in x 1 in,…

Product ID: 7000000736
($85.76 ea.)

Scotch-Brite™ Roloc™ Bristle Disc, RD-ZB, 50, TR, Green, 1 in x 5/8 in, 20/Carto…

Product ID: 7000000740
($6.56 ea.)
Helping Manufacturers Nationwide

Stainless Steel Finishing Equipment from Waters Industrial

Waters Industrial, a leading industrial supply distributor, focuses on bringing you the newest, most cost effective industrial supplies for grinding, graining, and finishing stainless steel. Waters Industrial helps manufacturers nationwide achieve the best stainless steel finish possible by providing the trusted brands of metal finishing equipment, grinding supplies, abrasive belts, stroke sanders, and more. Waters Industrial provides metal finishing equipment and supplies from top quality brands in the metal finishing industry. All grinding and polishing needs are well met by Waters Industrial’s large inventory of stainless steel finishing equipment, metal finishing equipment, stroke sanders, and stainless steel buffing equipment. Waters Industrial is the best 'one stop shop' for all your industrial supplies for buffing, grinding, graining, and finishing of stainless steel.

Top