All Products>Abrasives>3M™ Trizact™ PSA Film Disc 568XA, 3MIL, 5 in x 3/8 in, Die 500R

3M™ Trizact™ PSA Film Disc 568XA, 3MIL, 5 in x 3/8 in, Die 500R

Product ID: 7010509513
$638.00 ($6.38 ea.)

QTY:

Product Description

Finish and Repair Sensitive Surfaces
3M™ Trizact™ PSA Film Disc 568XA was engineered with defect repair in mind. Sensitive surfaces, like glass, acrylic and solid surfacing, require an abrasive that cuts aggressively without significantly gouging or scratching the surface. The mineral, adhered to a PSA backing using microreplication technology, cuts consistently and produces a high gloss level, which is often desirable during surface finishing. What's more — the film backing is water resistant and requires little water for touch-up, minimizing mess and processing steps.

Swift Tool Attachment
The pressure-sensitive adhesive (PSA) on the back of 3M™ Trizact™ PSA Film Disc 568XA helps with easy power tool attachment; it's as simple as pressing on a sticker. The PSA backing adheres firmly to a backup pad when light pressure is applied, and it can be peeled off just as easily, leaving a clean surface for the next abrasive in the sequence. With only a thin layer of adhesive standing between the abrasive and the backup pad, power is transmitted directly to the workpiece surface and there are fewer barriers that limit the disc's ability to sand aggressively. Convenient liners reduce contamination of the adhesive, maximizing adherence to the disc pad.

3M™ Science, Applied to Trizact™ Abrasives
3M™ Trizact™ abrasives revitalize light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Big benefits are achieved through a proprietary 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral. The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed – rather than erratic– contact for a consistent cut.

Product Features

Abrasive MaterialCerium Oxide
Attachment TypePSA
Center Hole Diameter0.375 in
Hole Configuration500R
Overall Diameter5.0 in

Product Highlights

  • Designed for defect repair, finishing and polishing
  • Natural cerium oxide mineral cuts sharply without gouging substrate
  • 3M™ Trizact™ microreplication technology enhances consistent cutting action
  • Adhesive backing for swift, easy power tool attachment
  • Little water required for optimal results

Need Sales Help?

Contact Us

Similar Items

Coarse Surface Conditioning Belt (1/4 x 18)

ACRS Surface Conditioning Belt - 1/4" x 18" - Brown, Coarse

Product ID: 10131
$49.60 ($2.48 ea.)
Medium Surface Conditioning Belt (1/4 x 18)

AMED Surface Conditioning Belt - 1/4" x 18" - Maroon, Medium

Product ID: 10141
$50.20 ($2.51 ea.)
Coarse Premium Surface Conditioning Belt (1/4 x 24)

3M Surface Conditioning Belt - 1/4" x 24" - Brown, Coarse

Product ID: 10230
$72.60 ($3.63 ea.)
Medium Surface Conditioning Belt (1/4 x 24)

AMED Surface Conditioning Belt - 1/4" x 24" - Maroon, Medium

Product ID: 10241
$51.40 ($2.57 ea.)
Helping Manufacturers Nationwide

Stainless Steel Finishing Equipment from Waters Industrial

Waters Industrial, a leading industrial supply distributor, focuses on bringing you the newest, most cost effective industrial supplies for grinding, graining, and finishing stainless steel. Waters Industrial helps manufacturers nationwide achieve the best stainless steel finish possible by providing the trusted brands of metal finishing equipment, grinding supplies, abrasive belts, stroke sanders, and more. Waters Industrial provides metal finishing equipment and supplies from top quality brands in the metal finishing industry. All grinding and polishing needs are well met by Waters Industrial’s large inventory of stainless steel finishing equipment, metal finishing equipment, stroke sanders, and stainless steel buffing equipment. Waters Industrial is the best 'one stop shop' for all your industrial supplies for buffing, grinding, graining, and finishing of stainless steel.

Top