Standard Abrasives™ Surface Conditioning GP Disc, 845621, 5 in x 7/8 in Hole CRS, 10/Pac, 100 ea/Case

Tough Woven Fabric
Standard Abrasives™ Surface Conditioning Discs provide a more compact structure of non-woven fibers than Buff & Blend products. The GP disk has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disk and allows for extended use on ferrous materials or steel. This material requires very little contact pressure and has the most flexibility available.

Mixed Materials
Standard Abrasives™ Surface Conditioning GP Discs are made of a tough, but flexible nylon mesh that fits contoured surfaces. This mesh is also laced with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and should be used for applications on ferrous metals and composites. Aluminum oxide discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades ranging from Very Fine to Coarse.

Strong Backing for Better Performance
For the best results, it is recommended that a Standard Abrasives brand holder pad is used. Tests have shown that surface conditioning disks, when used in conjunction with the Standard Abrasives holder pad, have a greater durability and performance rate. These pads also assure that pressure is applied evenly all the way to the edge of the disk. Holder pads for Quick Change Discs are available in 3 attachment styles: TS, TR and TP.

• High edge durability and flexibility
• Designed for blending, coating removal, finishing, and light deburring
• Aluminum Oxide on GP material provides high initial and extended cut rate
• Best material when low contact pressure and load resisting are required
• Most efficient on ferrous materials on both flat and contoured surfaces
• Available with Hook and Loop attachment