All Products>Abrasives>Scotch-Brite™ Premium Blend and Finish Bonded Cleaning Brush Steel Core, PB-CB, 7A Coarse, 12 in x 43 in x 5.75 in, SPR, 1 ea/Case

Scotch-Brite™ Premium Blend and Finish Bonded Cleaning Brush Steel Core, PB-CB, 7A Coarse, 12 in x 43 in x 5.75 in, SPR, 1 ea/Case

Product ID: 7100220524
$8,387.22

QTY:

Product Description

Premium Deburring and Finishing in One StepAmong Scotch-Brite™ Flap and Cleaning Brushes, the Scotch-Brite™ Premium Blend and Finish Bonded Cleaning Brush Steel Core is one of the most universally praised brushes for its aggressive deburring attributes, while leaving a consistent, soft finish.

Combining coarse (CRS) aluminum oxide mineral with a hard density (7), this Scotch-Brite™ brush is especially tough and strong. When brought in contact with the workpiece, this brush will not yield or cut as softly as other brushes – for example, the Clean & Finish or High Strength Flap Brushes. As operators know, many variables impact which abrasive should be used. For some applications, a lighter, softer abrasive is the best choice. For applications that require heavy-duty deburring and finishing, Scotch-Brite™ Premium Blend and Finish Bonded Cleaning Brush Steel Core is a good choice.

Durable Construction of Scotch-Brite™ Cleaning Brushes3M engineers Scotch-Brite™ cleaning brushes by attaching circular sections of non-woven material to a cylindrical core. Typical applications for cleaning brushes include coil cleaning prior to coating, deburring, reclaiming sheet and coil and scale/oxide removal. The Scotch-Brite™ brush has an arbor hole to accommodate a shaft and may be secured in place with a flange and key. It will not fray or splinter when faced with edges. The steel core on the brush keeps it sturdy and adds a level of durability to the brush when it’s run on finishing equipment. Operators may choose to add a lubricant or coolant when cleaning, because it helps wash away swarf and reduce loading, extending the brush’s service life.

The Many Benefits of Open Web AbrasivesNonwoven technology makes Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.

Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

Product Features

Abrasive MaterialAluminum Oxide
Center Hole Diameter5.75 in
Density7.0
GritNon Pertinent
Maximum Speed1500.0
Maximum Speed UOMrpm
Overall Diameter12.0 in
Overall Width43.0 in

Product Highlights

  • Resin bonded on steel core for increased durability
  • Resists deflection under heavy pressure
  • Aluminum oxide mineral cuts sharp but leaves a soft scratch pattern
  • Ideal for deburring, cleaning, finishing and surface preparation
  • Steel core helps minimize brush’s tendency to yield or deflect on the workpiece
  • Open web resists loading, contributing to longer abrasive service life

Need Sales Help?

Contact Us

Similar Items

3M™ Microfinishing Film Roll 372L, 30 Mic 5MIL, 4 in x 150 ft x 3 in (101.6mmx45…

Product ID: 7000000248
($230.44 ea.)

3M™ Microfinishing Film Roll 362L, 60 Mic 3MIL, 4 in x 150 ft x 3 in (101.6mmx45…

Product ID: 7000000333
($207.19 ea.)

3M™ Roloc™ Disc 777F, TR, 3 in x NH, P120 YF-weight, 50/Carton, 200 ea/Case

Product ID: 7000000557
($1.41 ea.)

3M™ Flexible Diamond Hand Lap 6200J, 2-1/4 in x 3-3/4 in M40 Micron, 10 ea/Case

Product ID: 7000000576
($21.48 ea.)

Scotch-Brite™ EXL Unitized Wheel, XL-UW, 2S Fine, 1 in x 1 in x 3/16 in, 50 ea/C…

Product ID: 7000000690
($4.87 ea.)

Scotch-Brite™ EXL Unitized Wheel, XL-UW, 2S Fine, 2 in x 1/4 in x 1/4 in, 60 ea/…

Product ID: 7000000696
($5.14 ea.)

Scotch-Brite™ EXL Unitized Wheel, XL-UW, 6A Medium, 3 in x 1/4 in x 3/8 in, 40 e…

Product ID: 7000000703
($10.09 ea.)

Scotch-Brite™ Hand Pad 7447, HP-HP, A/O Very Fine, Maroon, 6 in x 9 in, 20/Carto…

Product ID: 7000000728
($88.23 ea.)

Scotch-Brite™ EXL Deburring Convolute Wheel, XL-WL, 8S Fine, 6 in x 1 in x 1 in,…

Product ID: 7000000736
($85.76 ea.)

Scotch-Brite™ Roloc™ Bristle Disc, RD-ZB, 50, TR, Green, 1 in x 5/8 in, 20/Carto…

Product ID: 7000000740
($6.56 ea.)
Helping Manufacturers Nationwide

Stainless Steel Finishing Equipment from Waters Industrial

Waters Industrial, a leading industrial supply distributor, focuses on bringing you the newest, most cost effective industrial supplies for grinding, graining, and finishing stainless steel. Waters Industrial helps manufacturers nationwide achieve the best stainless steel finish possible by providing the trusted brands of metal finishing equipment, grinding supplies, abrasive belts, stroke sanders, and more. Waters Industrial provides metal finishing equipment and supplies from top quality brands in the metal finishing industry. All grinding and polishing needs are well met by Waters Industrial’s large inventory of stainless steel finishing equipment, metal finishing equipment, stroke sanders, and stainless steel buffing equipment. Waters Industrial is the best 'one stop shop' for all your industrial supplies for buffing, grinding, graining, and finishing of stainless steel.

Top