3M™ Diamond Metal Bond Disc 6MB1, 15 Mic, Config

Strike a Balance: Sharp Cut, Fine Finish
Balancing sharp cut with fine finish, 3M™ Diamond Metal Bond Disc 6MB1 is constructed with micron-graded diamond mineral adhered to a flat brass plate. The electroplated adhesion process helps with uniform distribution of the mineral on the disc. A uniform pattern, in turn, helps deliver a consistent cut throughout the abrasive's life.

An Acute Requirement
The sharp and angular characteristics of diamond mineral make it ideal for lapping and finishing. This tough mineral can cut aggressively but still produce uniform scratch patterns. Moreover, we offer this diamond abrasive in a range of grades, so operators can choose the right grade for their unique application. Typically during lapping, operators will rotate lapping discs and plates at low speeds. The slow speed, in combination diamond mineral, helps remove surface damage but still produce the desired flatness and dimensions.

Use 3M™ Diamond Metal Bond Disc 6MB1 for applications that require superior surface finishes and for projects that need good precision and control. Commonly used in the general industrial, precision grinding and finishing and aerospace industries, it's a good abrasive to have on hand when achieving acute dimensions is key.

• Micron-graded diamond mineral cuts sharp but delivers fine finishes
• Evenly-spaced mineral helps remove workpiece imperfections at a consistent, controlled rate
• Good for lapping and finishing
• May be used on a variety of hard to grind substrates
• Available in a variety of grades