Standard Abrasives™ A/O Square Pad 724055, 3/4 x 3/4 in x 3/4 in, 1/4-20, 80, 100/Carton, 1000 ea/Case

Tips for Optimal Use
A Standard Abrasives™ Aluminum Oxide Square Pad is constructed by folding strips of coated abrasive material over a metal eyelet to form a square abrasive pad. As the pad rotates, the corners provide fast biting action, wearing down to expose fresh mineral. Square pads run smoothly and offer great control and access for corner weld grinding and cleaning. They are a bit more aggressive than cross pads given their square design, so they're a good choice for tougher grinding and blending applications. Small size pads are ideally suited for tubes and internal diameters. These pads may be used with portable die grinders to facilitate easier and closer access to the workpiece, and the metal eyelet attaches to a mandrel —long or short — enabling the operator to tighten or extend the abrasive's proximity to the part.

Achieve a Sharp Cut and Soft Scratch Pattern
Aluminum oxide mineral delivers a soft scratch pattern that is often desirable for finishing and polishing. Aluminum oxide is a popular mineral choice among industrial professionals because of its fast cut and long life. It's suitable for use on many metals, including mild and carbon steel. Aluminum oxide mineral is adhered to the backing in a closed coat construction — meaning the mineral covers 100% of the backing. The greater grain density of this coated abrasive equates to finer finishes.

• Pad corners perform fast grinding, deburring, and polishing on channels, fillets and corners
• Folded abrasive cloth produces cushioned, chatter-free grinding
• Pad size is convenient for spotting on flat surfaces
• Mandrel use increases range and versatility
• Resin bond system provides good grain retention and life