3M™ Resin Bond CBN Wheels and Tools, 11V9 3.75-1.5-.125-1.25 D320 685DN

These resin bonded diamond wheels are designed for high performance grinding on carbide. The 3M™ Diamond Wheel 695DM line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M™ Diamond Wheel 695PM provides.

High Quality Bonding
These superabrasive wheels also use a resin bonding which are specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This U rated bond is very hard and excellent for precision work on tool metals like carbide. This also allows for faster cuts and a higher cut rate. Used in wet grinding applications with high volume flood coolant systems, this bonding material is used with oil based lubricants for lower grinding temperatures.

The Right Wheels for the Job
3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. They feature a variety of metal cores, including aluminum, steel, composite and copper, and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to "lights-out" and long production runs, 3M has the wheel design to meet your needs.

• Diamond abrasive capable of cutting or shaping cemented carbide, carbons and ceramics
• Durable resin bond resists deterioration from heat, extending the life of the abrasive wheel
• Designed to provide free cutting form and the fastest cut rate
• Various wheel designs are available for gashing, primary and secondary relief and end work
• Arbor holes are made to customer specifications