Corner and Edge Grinding with Five Point Pads

Very aggressive stock removal with less risk of carpal tunnel

Pad corners wear down consistently exposing fresh abrasive. The five cutting corners provide a faster grind-blending than square pads on the inner and outer diameters or tubing and pipes, channels, fillets, corners, or spotting on flat surfaces.

Corner & Edge Grinding with 5 Point Pads

Five Point Pads

80 grit

2-1/2 x 3/4 x 3/8ah	50027
3 x 3/4 x 3/8ah	50035
4 x 3/4 x 5/8ah	50064
5 x 3/8 x 5/8ah	50074
6 x 3/8 x 3/8ah	50088

120 grit

2-1/2 x 3/4 x 3/8ah	50031
3 x 3/4 x 3/8ah	50039
4 x 3/4 x 5/8ah	50068
5 x 3/8 x 5/8ah	50076
6 x 3/8 x 3/8ah	50090

Recommended Tools

Light Stock Removal

.8 hp
13,000 rpm
3/8-24 spindle

2-1/2 x 3/4 x 3/8ah	02050
3 x 3/4 x 3/8ah	02050
4 x 3/4 x 5/8ah	N/A
5 x 3/8 x 5/8ah	N/A
6 x 3/8 x 3/8ah	N/A

Medium Stock Removal

.9 hp
9,000 rpm
5/8-11 spindle

2-1/2 x 3/4 x 3/8ah	N/A
3 x 3/4 x 3/8ah	N/A
4 x 3/4 x 5/8ah	02075
5 x 3/8 x 5/8ah	02075
6 x 3/8 x 3/8ah	02075

Heavy Stock Removal

1.7 hp
6,000 rpm
5/8-11 spindle

2-1/2 x 3/4 x 3/8ah	N/A
3 x 3/4 x 3/8ah	N/A
4 x 3/4 x 5/8ah	02095
5 x 3/8 x 5/8ah	02095
6 x 3/8 x 3/8ah	02095

Contact the metal finishing equipment supplier Waters Industrial today!

For more information about the stainless steel finishing equipment available from stroke sanders to abrasive belts and more.

Phone

(262) 786-1610

Address

1525 N. Barker Road,
Brookfield, WI, 53045

Hours

Monday - Friday 7am - 4pm
Saturday - Sunday Closed